AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Lakeway
Furnace repair in Lakeway typically costs between $150 and $700, depending on whether it’s a bad ignitor, a failed capacitor, or a more involved heat exchanger or gas valve issue. If you also need Lakeway AC Repair, we handle both systems. Most calls we handle in Lakeway are diagnosed and repaired the same day, provided we have the part on the truck, which we usually do for common brands. If your heat won’t kick on and you’re on the side of RM 620 or up in the hills off Lakeway Boulevard, call (361) 326-1553. A live person answers, and we’ll give you a straight answer about what it will cost before a technician ever drives out.
Lakeway is different from flat, uniform suburbia. Homes here are built on limestone, not soil. That changes how a furnace behaves, how condensate drains, and how electrical components age. Our techs run furnace repair calls from Apache Shores to Flintrock Falls every week, and we know what to expect before we even open the panel. If you need furnace work done right the first time, our Furnace Repair team is the call to make.
Why Brandt HVAC Co Austin Is Lakeway’s Preferred Furnace Repair Company
Lakeway homeowners tend to ask more questions than most, and they should. A lot of homes here are big, custom builds with multi-zone systems, variable-speed blowers, and high-efficiency heat pumps paired with gas furnaces. That’s not the kind of equipment a rookie tech should be troubleshooting from a YouTube video. Our techs see these systems every day, from original 1980s ranch homes off Lohmans Crossing to new construction in the master-planned communities up and down Lakeway Boulevard.
We don’t send out a stranger. Every Brandt HVAC technician is background-checked, badge-verified, and introduced to you by name and photo before they arrive. That’s the Threshold Verified standard, and it matters in a place like Lakeway, where people work hard all week and don’t have time to wonder who’s at the door. If a repair ever fails within 365 days, we return and fix it again at no charge under the 365-Day Done Right Promise. That’s not a slogan. It’s how our Furnace Repair in Lakeway service works.
Devin Marlowe, who leads our team, put it plainly when we started serving Lakeway: price it honestly, tell the customer who’s coming, and stand behind the work. We answer our own phone around the clock, so when a furnace quits on a January night, you’re not leaving a message and hoping.
Styles & brands we work with
Gas Furnace Repair in Lakeway
Gas Furnace Repair in Lakeway usually comes down to one of four things: a failed ignitor, a bad flame sensor, a dead inducer motor, or a gas valve that won’t open. On older homes near Lake Travis, we also see heat exchanger corrosion from years of lake humidity and alkaline dust from the limestone quarry operations south of RM 620. A typical gas furnace repair in Lakeway runs $150 to $700, parts and labor included, written down before any work starts.
Ignitor and Flame Sensor Work
Most no-heat calls in Lakeway that we answer in the winter are solved with a $150 to $300 repair. An ignitor that’s cracked or a flame sensor that’s coated with residue will keep a furnace from firing. Older single-stage furnaces from the 1990s tend to use hot-surface ignitors that simply wear out, especially in homes that run heat during the damp cold spells that roll through the Hill Country.
Inducer Motor and Gas Valve
When the inducer motor fails, the furnace can’t pull combustion gases through the heat exchanger safely, so it won’t light. In Lakeway homes with steep hillside electrical runs, voltage instability from long utility drops can stress inducer motors and control boards prematurely. A gas valve that won’t open is less common, but it’s a straightforward diagnosis once a tech confirms pressure with a manometer. These jobs generally stay within the $300 to $700 range.
Furnace Tune Up in Lakeway
Furnace Tune Up in Lakeway is different from a tune-up in a flat subdivision. Here, a good tune-up checks the condenser coil and static pressure even when it’s heating season. Because so many Lakeway systems are paired with heat pumps and multi-zone dampers, a tech who only looks at the furnace cabinet is missing half the picture. A Lakeway furnace tune-up runs $80 to $200 and takes under two hours on a normal single-zone system. Larger custom homes with two or three zones may take longer.
Coil and Static Pressure Check
Our techs open the outdoor cabinet and inspect the coil every time, no matter what the thermostat says. In Lakeway, limestone dust and lake humidity eat condenser coils faster than the manufacturer ever planned for. If static pressure across the coil is too high, a furnace will short-cycle, overheat, and eventually trip a limit switch. Catching that during a tune-up prevents a dead furnace in February.
Capacitor and Ignition Testing
A furnace tune-up in Lakeway should include a capacitor test. High heat and steady humidity make capacitors swell and fail early, and a weak capacitor is the most common reason a blower won’t start or a compressor in a heat pump won’t engage. We test amperage and settle-out voltage, and if a capacitor is even marginally weak, we’ll quote a replacement cost on the spot.
Trusted Brands We Service in Lakeway
We repair furnaces from every major residential brand, and we stock common parts for the ones we see most in Lakeway. York and Bryant furnaces are common in 1990s and early-2000s Lakeway homes, while newer custom builds often run Daikin or American Standard high-efficiency systems. Because we keep ignitors, flame sensors, capacitors, and pressure switches on the truck, we can usually finish a repair without scheduling a second trip. That means less time without heat when a cold front pushes through the Hill Country.
Common Furnace Repair Problems We See in Lakeway Homes
- Failed capacitors from heat and erratic hillside voltage. Lakeway’s long, hot cooling seasons stress capacitors, and homes on steep lots sometimes see voltage swings that accelerate wear. A capacitor that’s outside its rated range by just 10% can keep a blower from starting.
- Inducer motors corroded by lake humidity and alkaline dust. The combination of moisture off Lake Travis and fine alkaline dust from quarry operations south of RM 620 shortens the life of inducer motors, especially on units installed before corrosion-resistant coatings were common.
- Multi-zone board mis-wiring from previous handyman repairs. We see this often in large Lakeway homes where someone swapped a thermostat or “fixed” a damper themselves. The result is one zone overheating while another stays cold, and the furnace short-cycles.
- Heat exchanger degradation on older systems near the lake. Homes in original 1970s-80s lake house stock, especially within a mile of the shoreline, trap more humidity indoors. If an original heat exchanger is still in place after 30-plus years, a cracked cell is a real risk and a carbon monoxide concern.
On Lakeway’s south side of RM 620, many original 1980s condenser units sit on steep limestone slopes where lake humidity and alkaline quarry dust corrode coils and condenser fins faster than anywhere else in the Lake Travis area. A coil condition check is a routine part of our furnace repair calls here, and for good reason. We had a furnace repair call in the Yaupon Creek area where a 3-ton Trane unit was short-cycling on a high-end multi-zone system. Our tech traced it to a weak capacitor and a corroded condenser coil from years of limestone dust. After a $40 capacitor swap and a coil cleaning, we rechecked static pressure and got the multi-zone dampers modulating properly again. That’s the kind of issue a generic tune-up never finds.
See the difference
Before
After
Before
After
Before
AfterPricing for Furnace Repair in Lakeway, TX
We post our pricing because homeowners in Lakeway deserve to know the range before they say yes. A straight diagnostic and a common part like an ignitor or flame sensor runs $150 to $300. A more involved repair like an inducer motor, a control board, or a gas valve runs $300 to $700. We write the number down before any work starts. No blurry estimates, no “we’ll see once we open it up.” The price you approve is the price you pay.
| Service | Typical Lakeway Price Range |
|---|---|
| Furnace Repair (diagnostic + common part) | $150 – $700 |
| Furnace Tune-Up (includes coil check, static pressure test, capacitor test) | $80 – $200 |
Call (361) 326-1553 for a free estimate before you commit to anything. A real person answers. We’ll talk about your furnace, the age of the system, and what you’re seeing happen, and we’ll give you a written price range over the phone. No pressure, no games.
We Also Serve Cities Near Lakeway
Our technicians handle furnace repair across the greater Austin area. We serve Lakeway daily, and we’re also on call for customers in Austin, Cedar Park, San Marcos, and Brushy Creek. If you’re in one of those cities and your furnace just quit, call the same number. We’ll get someone out as fast as we would for a Lakeway customer.
Serving Lakeway, TX - Our Local Coverage Area
We’re based in the Lakeway area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Lakeway
Because in Lakeway, the outdoor coil is sitting in limestone dust and lake humidity year-round, and a dirty or corroded coil raises static pressure across the entire system, which makes the furnace blower work harder and overheat. Checking the coil during a heating-season repair catches problems before they cause a shutdown. Call (361) 326-1553 and our tech will include a coil check on any furnace repair visit.
On a large Lakeway home with multiple zones, a tune-up includes testing static pressure with the dampers open and closed, verifying each zone motor moves freely, checking the inducer and blower capacitor, inspecting the condenser coil, and confirming the gas manifold pressure. It takes longer than a single-zone tune-up, but it prevents the zone board from fighting itself and wearing out the blower. Call (361) 326-1553 to schedule one.
Yes. Our techs routinely work on Lakeway equipment installed on sloped limestone shelves, and we carry the right brackets and corrosion-resistant fasteners to remount or re-level a unit safely. A unit that has shifted on a slope will have poor condensate drainage and uneven coil loading. If your equipment is on a grade and acting up, call (361) 326-1553 for a free estimate.
The February 2021 freeze exposed a lot of undersized and unprotected furnaces in Lakeway. Many systems lost control boards to power surges during rolling outages, or the freeze damaged uninsulated condensate lines and outdoor heat pump components. We replace freeze-damaged boards, thawed and re-insulated drain lines, and then run a full heat cycle to confirm it’s safe. Call (361) 326-1553 and tell us what you’re seeing. We’ll give you an honest read over the phone.
A repair visit is for a furnace that won’t run, won’t stay running, or is making a noise that shouldn’t be there. A tune-up is a preventive inspection that includes testing components that commonly fail and cleaning what’s dirty before it becomes a breakdown. In Lakeway, we often recommend a tune-up after a repair if the system has been running in dusty or humid conditions for years. Call (361) 326-1553 for a free estimate on either.
Call Brandt HVAC Co Austin for Furnace Repair in Lakeway
Lakeway’s mix of steep limestone lots, lake humidity, and high-end multi-zone systems means furnace repair here is never one-size-fits-all. You need a tech who understands why a capacitor fails faster on a hillside, why coils corrode near the lake, and why a multi-zone board that’s mis-wired will drive you crazy. That’s the kind of work we do every week. Call (361) 326-1553 for a free estimate. We’ll tell you who’s coming, give you a written price before any work starts, and stand behind every repair with the 365-Day Done Right Promise.
Written by Devin Marlowe, Owner at Brandt HVAC Co Austin, serving Lakeway since 2003.