A Brandt company - serving Austin, TX

Rheem AC Repair Nationwide

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

Your new heating and cooling system for as low as$119/month*On approved credit; ask for current terms

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Rheem AC Repair in Austin: What to Know First

Rheem AC repair in Austin typically runs $150 to $650, and most jobs are completed in a single visit. We’re an independent Rheem service provider, not a factory-authorized dealer, which means we fix what’s actually broken without pushing you toward a replacement you don’t need. If your Rheem is blowing warm air, short cycling, or making a sound it’s never made before, this page will tell you what’s likely happening, what it should cost, and how to get it fixed without opening your door to a stranger. Call (361) 326-1553 for a written price before any work starts.

Call (361) 326-1553

How Rheem Products Fail – and How We Fix Them

Rheem builds solid equipment, but Austin summers expose weak points that milder climates never touch. Here’s what we see most often on Rheem units in this city:

  • Capacitor failure on Rheem Classic and Prestige series condensers. The capacitor gives the compressor and fan motor their starting jolt. In Austin, the combination of sustained 100-degree days and attic heat radiating onto condenser units shortens capacitor life to three or four years on many Rheem units. Symptoms are classic: the outdoor unit hums but the fan doesn’t spin, or the compressor won’t kick on at all. We replace with OEM-grade capacitors rated for the heat load, not the cheapest generic on the shelf.
  • Contactor pitting on Rheem RA14 and RA16 condensing units. The contactor is the electrical switch that tells your AC to start. Austin’s frequent brownouts and voltage dips during peak demand cause arcing at the contactor points, which eventually leaves burn marks that stop the unit from starting. We check contactor condition on every Rheem repair call, even if you called about something else, because a pitted contactor is usually the next failure waiting to happen.
  • Refrigerant leaks at the evaporator coil on Rheem RCFL and RCFN air handlers. Rheem’s aluminum coils resist corrosion better than the old copper ones, but they’re not immune. We regularly find slow leaks at the U-bends where the coil tubes connect. The tell is a unit that cools fine in the morning but loses ground by 3 p.m., then runs constantly overnight. Fixing this right means finding the leak, not just topping off refrigerant. A recharge without a leak repair is a temporary bandage that costs you again in a month.
  • Condenser fan motor failure on Rheem RA13 and Classic units in South and East Austin. The fan motor sits in direct sun on most install pads, and Austin’s heat plus cottonwood debris at the coils forces the motor to work harder than it should. When the bearings go, you’ll hear a grinding sound from the outdoor unit, or the fan stops entirely and the compressor shuts down on thermal overload. We replace with OEM or OEM-equivalent motors with sealed bearings rated for the heat exposure these units actually see here.
  • Drain pan and drain line issues on Rheem horizontal air handlers in attics. Austin attics run 140 degrees or hotter in July. That heat makes the coil work overtime and produces more condensate than the drain system was sized for in many older installations. We find drain pans rusted through, float switches tripped by standing water, and secondary lines clogged with algae. This is a repair that matters for more than comfort: a clogged drain in an attic unit will soak your ceiling if it’s not caught early.
Explore

Styles & brands we work with

AC repair
AC repair
Furnace & heating
Furnace & heating
Heat pumps
Heat pumps
Ductless mini splits
Ductless mini splits
Carrier
Carrier
Trane
Trane
Goodman
Goodman

Our Rheem AC Repair Process

Here’s what actually happens when you call us for a Rheem repair:

  1. 1
    You call, a live person answers. No phone tree, no voicemail, no “leave a message and we’ll call back.” That matters when your AC is down in August.
  2. 2
    We tell you who’s coming before they arrive. Devin Marlowe sends the technician’s name and photo to your phone. The tech shows up in a Brandt uniform and hands you a photo ID badge at the door. If the person at your door isn’t who we said was coming, that visit is on us.
  3. 3
    Diagnostic, in plain language. The tech checks the big three on a Rheem: capacitor, contactor, and refrigerant pressures. Then they explain what’s wrong in words that make sense, and what can wait versus what can’t.
  4. 4
    Written price before any work. You see the number, the parts being used, and the labor, in writing, before a single tool comes out. We don’t start work until you say yes.
  5. 5
    The repair, with OEM or quality aftermarket parts. For warranty-covered Rheem units, we use factory parts to keep your warranty intact. For units out of warranty, we’ll present the OEM option and a quality aftermarket option with a straight recommendation on which one makes sense.
  6. 6
    Test, clean, and walk you through it. We run the system through a full cycle, show you what we found and what we fixed, and leave the work area cleaner than we found it. You get a written guarantee on the repair before we leave.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Rheem AC Repair Costs in Austin

Here are real numbers for the most common Rheem repairs we do in Austin:

  • Capacitor replacement: $150 – $275, parts and labor included.
  • Contactor replacement: $150 – $250, parts and labor included.
  • Condenser fan motor replacement: $350 – $550, depending on the Rheem model and motor type.
  • Refrigerant recharge with leak check: $250 – $450 for the recharge, depending on refrigerant type (R-410A units cost more than older models). Leak repair is quoted separately once we find the leak.
  • Compressor repair or replacement: $450 – $650 for the repair, but be honest with yourself here: on a Rheem unit that’s more than 12 years old, this is the point where replacement starts to make financial sense. We’ll tell you that plainly.

What moves the price: the specific Rheem model, whether it’s still under warranty, refrigerant type, and how accessible the unit is. Every quote is a written price before work starts. Call (361) 326-1553 for a free estimate on your specific system.

Why Austin Homeowners Call Brandt HVAC Co Austin for Rheem Work

We’re an independent Rheem service provider, which means we work for you, not for the manufacturer’s warranty department. The 365-Day Done Right Promise covers every repair we make: if the same problem comes back within a year, we return at no charge, no argument. Every tech we send is background-checked, identity-verified through the Threshold Verified standard, and introduced to you by name and photo before they ever knock on the door. And if your Rheem unit is beyond saving, we service Carrier, Trane, and Lennox too, so you get an honest recommendation about what to replace it with, not a sales pitch for whatever we happen to carry. Devin Marlowe built this company around a simple idea: tell the homeowner what’s wrong, tell them what it costs, and stand behind the work. That’s it.

FAQs

Need HVAC help in Austin? Licensed & insured · 30-60 min response · free estimates
Call (361) 326-1553
Local Service Coverage

Request a Free Estimate in Austin

Tell us what you need - Brandt HVAC Co Austin responds fast. No obligation.

By submitting this form, you agree to the terms of our Privacy Policy and agree to be contacted through phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch