Furnace Repair in Austin, TX

Furnace Repair in Austin, TX

Furnace repair in Austin typically costs between $150 and $650 depending on the part that failed, and most repairs are completed the same day we diagnose the problem. The most common issues we see across Austin neighborhoods are failed igniters, bad flame sensors, worn blower motors, and control board failures. If your furnace is blowing cold air, cycling on and off, or making noises it never made before, call us at (361) 326-1553 and we’ll send a technician you’ll know by name before they knock.

Our home service area covers the full Austin metro, and this page covers everything about furnace repair: what it costs, how our process works, what we check, and what our guarantee covers. For an overview of everything we do on the heating side, start with our Heating & Furnace in Austin page.

We’re Brandt HVAC Co Austin. Most companies will tell you they fix furnaces. We tell you who’s coming to your door, what the repair will cost before we start, and exactly what happens if the fix doesn’t hold. That’s the whole point of what we do.

Key Takeaways

• Most Austin furnace repairs run $150 to $650, with igniters and flame sensors at the lower end and blower motors or control boards at the higher end.
• Every repair starts with a written price. You approve it before any work begins.
• Every repair includes a written guarantee. If it fails within 365 days, the return visit is free under the 365-Day Done Right Promise.
• A live person answers our phone 24/7. No voicemail, no automated phone tree.
• We service all major residential brands, including York, Daikin, Bryant, and American Standard.

When You Need Furnace Repair

Austin winters are short but they’re not gentle. We get hard freezes, ice on the rooftops, and homes that haven’t cycled their furnace in months suddenly asked to work overtime. Most furnace failures happen in exactly that moment: the first genuinely cold night of the year. Here are the specific signs that mean it’s time to call.

• The furnace blows cold air. This usually points to an igniter that won’t light the burner or a flame sensor that thinks the burner isn’t lit. In neighborhoods like Allandale and Crestview, where homes are older, we see failed igniters as the number one cause.
• The furnace short cycles. It kicks on, runs for two or three minutes, then shuts off. Then it does it again. A dirty flame sensor is the usual culprit, but a failing limit switch can do the same thing.
• You hear banging, rattling, or a loud boom on startup. A boom often means gas is building up before the igniter catches, and that is a genuine safety concern. Any delayed ignition warrants an immediate call. Don’t ignore it, and don’t keep cycling the unit.
• The blower runs but the air barely moves. If the fan is spinning but airflow through the vents is weak, you may have a failing blower motor or a clogged filter that’s been neglected so long the motor is straining. Austin’s dry, dusty air is hard on filters.
• The furnace won’t start at all. No fan, no heat, no response. That’s often a control board, a dead thermostat, or a tripped safety switch. We’ll diagnose it in the first visit and give you the written price before any repair.
• Your gas bill spiked with no obvious reason. A furnace that is running inefficiently burns more gas. If your usage went up but the home doesn’t feel warmer, the furnace is likely working harder than it should.

Our Furnace Repair Process

Here’s how a furnace repair call goes when you call Brandt HVAC Co Austin. Every step is designed so there are no surprises, no mystery charges, and no stranger at the door.

1. You call (361) 326-1553 and a live person answers. Not a recording. Not a callback queue. We ask what the furnace is doing, what you’ve already tried, and we schedule a visit at a time that works for you.
2. We send you the technician’s name and photo before the visit. This is the Threshold Verified standard. Before our technician arrives, you’ll know exactly who to expect. They’re background-checked, uniformed, and they’ll show a photo ID badge at the door. If someone shows up who you weren’t told to expect, that visit is on us, and we make it right.
3. The technician diagnoses the problem and shows you what they found. We’ll explain the issue in plain language. If it’s a failed igniter, we’ll say “failed igniter” and tell you what that part does and why it failed. You’ll get a written price for the repair before any work starts. No exceptions, ever.
4. You approve the work, and we fix it. We carry common parts on the truck: igniters, flame sensors, capacitors, pressure switches, and more. In most cases, the repair happens in the same visit.
5. We test the full heating sequence and you get a written guarantee. Before we leave, we’ll run the furnace through full cycles, check carbon monoxide levels, and confirm the system is venting safely. Your repair is guaranteed in writing. If the same repair fails within 365 days, we return free of charge under the 365-Day Done Right Promise.

Furnace Repair Pricing in Austin

Here’s what you can expect to pay for common furnace repairs in the Austin area. These are real ranges based on the work we perform regularly, not rough guesses. Every repair includes parts, labor, and a written guarantee.

Repair Type	Typical Cost Range	Notes
Flame sensor cleaning or replacement	$90 – $180	Most common cause of short cycling
Igniter replacement	$150 – $300	Parts and labor included
Capacitor replacement	$120 – $250	Blower motor startup failure
Pressure switch replacement	$160 – $350	Common on high-efficiency units
Blower motor replacement	$350 – $700	Price varies by motor type and access
Control board replacement	$350 – $650	Brand and model affect part cost

What affects the price? The part itself, how accessible the furnace is, and the age of the unit all play a role. A Goodman installed with plenty of clearance will cost less to repair than a Daikin tucked into a converted attic closet with a foot of headroom. We’ll give you the exact written price before we begin, and we will never start work before you’ve approved the number. If the repair is more than a new furnace would make sense on, we’ll tell you that too. Our only job on a service call is to give you the truth and the options.

Call (361) 326-1553 for a free estimate. The diagnosis visit has a service fee that we’ll credit toward the repair if you choose to move forward. We’ll tell you the fee up front when you call, before anyone comes out.

Brands We Repair

We service all major residential furnace brands and models. Whether you have a York system common in many Austin homes built in the 1990s, a Daikin high-efficiency unit, a Bryant furnace, or an American Standard, our techs have the diagnostic training and the parts access to fix it correctly. We don’t push one brand over another. We repair what you own.

Why Homeowners Choose Brandt HVAC Co Austin

Furnace repair is not a rare event, but it is a vulnerable one. When your heat is out and you’re waiting for a repair person, you want to know who is coming, what they’ll charge, and whether the fix will stick. That’s not asking a lot. Yet in this industry, it’s apparently rare enough that we built our company around answering those three questions before you ask them.

Our name, Brandt, comes from an old word for firebrand – a piece of wood that carries fire. For a company devoted to keeping homes warm, it fits. Every repair we complete is backed by the Threshold Verified standard: a background-checked, identity-verified technician whose name and photo you receive before arrival, with a photo ID badge shown at the door. If that process ever breaks down, we make it right.

We’re part of the Threshold Group family of home-service companies, established in 2003. Each location is independently owned and operated. This Austin location is led by Devin Marlowe, and the standard we hold ourselves to is entirely local: answer the phone with a live person, show up when we say we will, and put the price in writing before a single tool comes out.

FAQs – Furnace Repair

How much does furnace repair cost in Austin?

Most furnace repairs in Austin run between $150 and $650. A simple flame sensor cleaning is usually under $180, while replacing a blower motor or control board can run $350 to $700. You’ll get a written price before we start any work. Call (361) 326-1553 and we’ll give you a realistic range based on what your furnace is doing.

Can you fix my furnace the same day?

In most cases, yes. Our technicians carry common parts – igniters, flame sensors, capacitors, pressure switches – on the truck. If the failure is one of those, the repair usually happens in the same visit. If it’s a less common part, we’ll order it and typically return the next day. Call us at (361) 326-1553 and we’ll tell you what today’s schedule looks like.

Is it cheaper to repair or replace my furnace?

As a rule of thumb, if a repair costs more than half the price of a new furnace and the unit is over 15 years old, replacement often makes more financial sense. But you should have the full picture before deciding. We’ll give you the repair price in writing, and if replacement is the smarter long-term move, we’ll walk you through that option too. You make the call, with all the numbers in front of you.

What does the Brandt HVAC repair guarantee cover?

Every furnace repair we perform includes a written guarantee. If the same repair fails within 365 days, we return free of charge under our 365-Day Done Right Promise. There’s no argument, no prorated adjustment, no additional charge. The guarantee is in writing before we begin the work.

Do you repair furnaces at night or on weekends?

Yes. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail system. Not an answering service that takes a message. A person. If your furnace quits at 2 a.m. during a January freeze, you’ll talk to someone right away at (361) 326-1553.

Is a cracked heat exchanger dangerous?

Yes. A cracked heat exchanger can leak carbon monoxide into your living space, and carbon monoxide is colorless and odorless. This is a repair that requires immediate attention from a trained professional. Furnace heat exchangers and gas components are not DIY projects. If your carbon monoxide detector has gone off or you smell gas, call us immediately at (361) 326-1553 and ventilate the home.

Why is my furnace blowing cold air?

The most common cause is a failed igniter – the part that lights the burner. If the igniter won’t glow, the burner never lights, and the blower just pushes unheated air through your vents. We see this constantly in Austin, especially in longer stretches of cold weather when furnaces cycle frequently. The fix is usually under $300. Call (361) 326-1553 for a diagnosis and a written price.

Service Areas Around Austin

We serve the full Austin metro area, including central neighborhoods like Hyde Park, Bouldin Creek, and Travis Heights, north Austin communities along the 183 corridor, and areas extending east toward the airport and south through the 78745 and 78749 ZIP codes. Wherever you are in Austin, if your furnace is misbehaving, call (361) 326-1553 and a live person will get you on the schedule.

Ready to Get Your Furnace Repaired?

Call Brandt HVAC Co Austin at (361) 326-1553 for a free estimate. You’ll speak to a live person, we’ll schedule a visit around your life, and the technician who arrives will be someone you already know by name and photo. The repair will be quoted in writing before anything starts, and it will be guaranteed in writing when we’re done. That’s the way it should work, and it’s the way we do it.

Written by Devin Marlowe, Owner at Brandt HVAC Co Austin, serving Austin.