AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateFast, Reliable Furnace Repair Across Cedar Park
Furnace repair in Cedar Park typically costs between $150 and $700, and most jobs are finished the same day the technician arrives. We run service calls across Cedar Park every day, from Buttercup Creek to the newer subdivisions off Whitestone Boulevard. If your furnace is blowing cold air, short-cycling, or making a sound you’ve never heard before, call (361) 326-1553 and a live person picks up, day or night.
Cedar Park’s housing stock isn’t uniform. That matters when a furnace fails. Original 1990s systems in Buttercup Creek behave differently than the high-efficiency units in the new developments along Ronald Reagan Boulevard. We know which neighborhoods tend to have which problems, and that saves you time and money on the diagnosis.
Why Brandt HVAC Co Austin Is Cedar Park’s Preferred Furnace Repair Company
Cedar Park homeowners call us because they want to know exactly who is walking through the door. Every technician we send is background-checked and identity-verified under the Threshold Verified standard. Before your appointment, you get the technician’s name and photo. When they arrive, they show a photo ID badge at the door. If anyone shows up who you weren’t told to expect, that visit is on us.
Devin Marlowe leads our team, and the standard he set is simple. Written price before any work starts. Always. No exceptions. That matters to Cedar Park residents who’ve been burned by vague estimates that balloon after the repair begins. You’ll see the cost in writing and agree to it before a single tool comes out of the bag.
Our Furnace Repair team drives fully stocked trucks, which means most Cedar Park calls are finished in one visit. Ignitors, flame sensors, gas valves, blower motors, limit switches. We carry the common parts for Trane, Goodman, Lennox, and Rheem systems because we know waiting three days for a part in a cold house is not acceptable.
Styles & brands we work with
Furnace Tune Up in Cedar Park
A Furnace Tune Up in Cedar Park runs $80 to $200 and is the single smartest dollar you’ll spend before winter. Central Texas winters are mild, but that doesn’t mean your furnace sits idle. Dust, pet hair, and the normal buildup from a system that cycles on and off through fall and early spring all take a toll. A tune-up catches small problems before they become a 2 a.m. no-heat call during a January cold snap.
What the Tune-Up Covers
We inspect the heat exchanger for cracks, test the ignitor and flame sensor, check the gas valve operation, measure the blower motor’s electrical draw, and verify the limit switch is working properly. We also check static pressure in the ductwork. In Cedar Park’s older slab-foundation homes, undersized or sagging attic ductwork is a quiet killer of furnaces, and a tune-up catches it early.
When Cedar Park Homeowners Should Schedule
October is the sweet spot. Before the first real cold front pushes through Williamson County, get the furnace looked at. Our schedule fills quickly in November and December. If you haven’t had a tune-up in two years, your furnace is overdue, and a $120 visit now beats a $700 repair in February.
Emergency Furnace Repair in Cedar Park
Emergency Furnace Repair in Cedar Park usually falls between $150 and $700, depending on what failed. When a furnace goes down during a winter storm or a freeze warning, we treat it as a priority. Our phones are answered by a live person 24/7, not a voicemail tree. You tell us what’s happening, we dispatch a technician, and you get a name and photo before they arrive.
Same-Day Response
We know that a furnace failure in Cedar Park during a cold snap is more than an inconvenience. It’s a safety issue for older homeowners, babies, and anyone with respiratory conditions. Our crews are staged across the area, and Cedar Park is squarely in our normal service zone. Most emergency calls are answered the same day, often within hours.
What Triggers an Emergency
No heat during freezing weather. A gas smell. A burning smell that doesn’t go away when the furnace cycles. A loud banging or grinding. A limit switch that keeps tripping. These are not “wait and see” problems. Call us and we’ll walk through what you’re seeing, tell you whether it’s urgent, and get someone out if it is.
Trusted Brands We Service in Cedar Park
We service all major residential brands, and the calls we run in Cedar Park skew heavily toward Trane, Lennox, Goodman, and Rheem. Buttercup Creek’s original 1990s installs were often Goodman or Rheem. The custom homes off Cypress Creek Road frequently have Trane or Lennox. We stock ignitors, flame sensors, and pressure switches for these brands on our trucks, which means fewer return trips and faster repairs for Cedar Park customers.
See the difference
Before
After
Before
After
Before
AfterCommon Furnace Repair Problems We See in Cedar Park Homes
- Limit switch tripping on cold mornings. Cedar Park’s older homes often have undersized original ductwork. A new or even a healthy furnace can’t push enough air through those tight runs, the heat exchanger overheats, and the limit switch shuts the unit down as a safety measure. The fix is usually duct correction, not a new furnace.
- Cracked heat exchangers in 1990s systems. A 1994 or 1996 furnace has often reached the end of its heat exchanger’s service life. We caught one recently in Buttercup Creek, a cracked exchanger in a Carrier from 1994. The original ductwork was leaking 22% and the blower motor was pulling high static, so we sealed the runs and corrected airflow before final calibration.
- Nuisance breaker trips on inducer startup. Homes built in the 1970s and early 1980s often have electrical panels that predate modern furnace loads. When the inducer motor kicks on, the initial draw can trip an aging breaker. We check the panel, the capacitor, and the motor to isolate the real cause.
- Sagging attic ductwork killing blower motors. Slab foundations put furnaces in attics across much of Cedar Park. Texas heat bakes attic spaces, and duct runs that were marginally supported sag over time. Static pressure drops, the blower works harder, and the motor fails early. We correct the runs before we condemn the motor.
Pricing for Furnace Repair in Cedar Park, TX
Here are the honest numbers for cedar Park market rates. A furnace tune-up runs $80 to $200. A repair typically runs $150 to $700, depending on the component. A failed ignitor or flame sensor sits at the lower end. A gas valve replacement or a blower motor lands higher. Every single job gets a written price before any work starts. You’ll know the number, you’ll agree to it in writing, and that’s the number you pay.
| Service | Cedar Park Price Range |
|---|---|
| Furnace Tune Up | $80 – $200 |
| Furnace Repair | $150 – $700 |
Every repair includes a written guarantee. If the repair fails within the guarantee period, we come back at no charge under the 365-Day Done Right Promise. No argument. No additional bill. That’s the whole point of writing it down.
We Also Serve Cities Near Cedar Park
Our crews serve Cedar Park and the surrounding communities daily. If you’re in Austin, Hutto, Bastrop, or San Marcos and need furnace work, you’ll get the same written pricing, the same verified technician introduction, and the same 365-day guarantee.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Furnace Repair in Cedar Park
The high-limit switch trips when the heat exchanger gets too hot, and in Buttercup Creek the most common cause is undersized or collapsed original ductwork from the 1990s. Your furnace is producing heat fine, but it can’t push that heat through the ducts fast enough, so the system shuts down to prevent damage. The fix is correcting the ductwork and static pressure, not necessarily replacing the furnace. Call (361) 326-1553 and we’ll diagnose it properly.
Yes, a heat exchanger can often be replaced as a standalone repair. But in a 1990s Carrier in Cedar Park, you should consider the whole picture before spending. If the original ductwork is leaking, the blower motor is tired, and the system is approaching 30 years old, a repair alone may not make sense. We’ll show you the numbers for both options and let you decide. No pressure, no upsell.
It could be either. When the inducer motor starts, it pulls a spike of current. An aging breaker in a 1970s-era panel may not handle that spike even if the furnace is fine. A failing capacitor can also cause a higher-than-normal startup draw. We test both and tell you exactly which one is failing before quoting any work. Call (361) 326-1553 and we’ll sort it out.
Yes, and any company that replaces a furnace in a Cedar Park slab home without doing one is guessing. Slab foundations mean attic duct runs, and attic duct runs in old homes mean leaks, sagging, and poor airflow. A load calculation tells us what your specific floor plan actually needs. Skipping it is how you end up with a brand-new furnace that still can’t heat the back bedroom. We do the calculation on every replacement.
If you smell gas, leave the house immediately and call 911 or Atmos Energy from outside. Do not flip switches, use a phone inside, or start a car in the garage. Once the gas company clears the home, call us at (361) 326-1553 and we’ll find the leak. A gas smell is never a “wait until morning” situation, and during a winter storm when everyone’s furnaces are running full tilt, leaks and valve failures spike.
Brandt comes from an old word for a firebrand. It’s a fitting name for the work of keeping a home warm. That’s what we do in Cedar Park, and we do it with a written price, a written guarantee, and a technician you know by name before the door opens. Call (361) 326-1553 for a free estimate. A live person answers, day or night.
Written by Devin Marlowe, Owner at Brandt HVAC Co Austin, serving Cedar Park.